Product no.: 610627
3-axis robot The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
729.00 €
*
In stock |
|
Product no.: 701209
Training system PLC-Learn 1200 without CPU 1215C The "PLC-Learn 1200" training system is based on a plastic housing. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output and the signal input are each indicated by 8 LEDs (status). The "flash cards" field can be used to place flash cards and test them with the supplied 32 tasks with suggested solutions. The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult" and are very well suited for training as well as for exam preparation, e.g. for the training occupation "power electronics technician specialising in industrial engineering" (CPU 1215C). It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector. At the 26-pin interface, fischertechnik models such as the cycle line with 2 processing machines, conveyor belt etc. can be directly connected. 8 external inputs and 8 external outputs can be fed to the CPU via connecting cables at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). Furthermore, 2 analog inputs and 2 analog outputs of the CPU can be supplied via connecting cables to the CPU. Switching from current output 0..20mA to magnetic output 0...10V is possible via a slide switch. An extension of the mounting rail for the construction of further modules, e.g. LOGO!8, is possible. TECHNICAL DATA: Operating voltage: 24V DC / 750mA 1 PLC-Learn 1200 without SIMATIC 1215C DC/DC/DC, nominal 24V DC Dimensions: 310 x 170 x90mm (LxWxH) Weight: 1 Kg
|
645.00 €
*
In stock |
|
Product no.: 701209-CPU
Training system PLC-Learn 1200 with CPU 1215C The "PLC-Learn 1200" training system is based on a plastic housing. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output and the signal input are each indicated by 8 LEDs (status). The "flash cards" field can be used to place flash cards and test them with the supplied 32 tasks with suggested solutions. The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult" and are very well suited for training as well as for exam preparation, e.g. for the training occupation "power electronics technician specialising in industrial engineering" (CPU 1215C). It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector. At the 26-pin interface, fischertechnik models such as the cycle line with 2 processing machines, conveyor belt etc. can be directly connected. 8 external inputs and 8 external outputs can be fed to the CPU via connecting cables at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). Furthermore, 2 analog inputs and 2 analog outputs of the CPU can be supplied via connecting cables to the CPU. Switching from current output 0..20mA to magnetic output 0...10V is possible via a slide switch. An extension of the mounting rail for the construction of further modules, e.g. LOGO!8, is possible. TECHNICAL DATA: Operating voltage: 24V DC / 750mA 1 PLC-Learn 1200 with SIMATIC 1215C DC/DC/DC, nominal 24V DC Dimensions: 310 x 170 x90mm (LxWxH) Weight: 1,1 Kg
|
960.00 €
*
In stock |
|
Product no.: 610625
Cycle line with 2 processing machines Cycle line with a milling and drilling station with four conveyor belts in a U-shaped arrangement. The model can be ideally combined with the training model "3-axis robot with gripper". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
750.00 €
*
In stock |
|