Product no.: 701209-CPU

Training system PLC-Learn 1200 with CPU 1215C

The "PLC-Learn 1200" training system is based on a plastic housing. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output and the signal input are each indicated by 8 LEDs (status). The "flash cards" field can be used to place flash cards and test them with the supplied 32 tasks with suggested solutions.

The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult" and are very well suited for training as well as for exam preparation, e.g. for the training occupation "power electronics technician specialising in industrial engineering" (CPU 1215C).

It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

At the 26-pin interface, fischertechnik models such as the cycle line with 2 processing machines, conveyor belt etc. can be directly connected.

8 external inputs and 8 external outputs can be fed to the CPU via connecting cables at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). Furthermore, 2 analog inputs and 2 analog outputs of the CPU can be supplied via connecting cables to the CPU. Switching from current output 0..20mA to magnetic output 0...10V is possible via a slide switch.

An extension of the mounting rail for the construction of further modules, e.g. LOGO!8, is possible.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
8 Push-button/lock switch for digital signal input
8 LED for status display outputs 5mm red
8 LED for status display Inputs 5mm red
8 spring-loaded terminals for digital inputs 24VDC
8 spring-loaded terminals for digital output 24V
 7 Spring-loaded terminals for analog value processing
1 2mm LED Power indicator 3mm yellow
1 slide switch for current or voltage output
2 slide switches for analog internal/external as well as for plug-on module 2-point-controllers
5 Spring-loaded terminals 0V
3 spring terminals +12V DC
1 power supply socket for mains plug 24V DC /750mA max
1 interface connector 24-pin
1 interface plug 26-pin (fischertechnik)
2 PROFINET (LAN) sockets for patch cables in the rear panel
SCOPE OF SUPPLY:

1 PLC-Learn 1200 with SIMATIC 1215C DC/DC/DC, nominal 24V DC
1 plug-in power supply AC230V /DC 24V 750mA
32 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German
Order number: 701209-CPU

Dimensions: 310 x 170 x90mm (LxWxH)

Weight: 1,1 Kg

 

960.00 *

In stock

Accessories

Product no.: 200105

Details

The Plug-On Module "Dice" simulates a dice by 7 LEDs. With the switch S1 rolling the dice begins. The module can be plugged easily on top of the training devices LOGO!Learn Profi or Advanced and PLC-Trainer 1200. For operation with the LOGO! the Expansion Module "DM8" is required.

Technical Data:
Operating voltage12V DC to 24V DC
Dimensions (LxWxH): 85 x 82 x 25 mm

Scope of supply:
1 Plug-On Module "Dice"

 

80.00 *

In stock

Product no.: 200111

Details

The Plug-On Module "LED Traffic Light 2" can be plugged easily on the the interface connector (24-pin) of the PLC-Trainer 1200. Five required switching states (car and pedestrian) can be realized. Two pushbuttons for request of signal (pedestrian light) are integrated on the module.

Technical data:
Operating voltage 24V/DC
10x LED 5mm
2x Pushbuttons
Dimensions (LxWxH): 90 x 100 x 45 mm
Weight: ca. 0.1 kg

Scope of supply:
Plug-On Module "LED Traffic Light 2"

95.00 *

In stock

Product no.: 200110

Plug-on module Encoder motor

The plug-on module encoder motor can be plugged directly into the interface connector (24-pin) of the PLC-Learn 1200, PLC-Trainer 1200, PLC-Trainer 300, LOGO!Learn Classic, and the IOT-Trainer2000.

Technical data of the encoder motor:

Quadrature encoder
Power supply 24VDC
Signal: quadrature encoder, push-pull output (0/24V) max. 10mA
Frequency: max 1KHz
Motor 24V DC

The following tasks with solutions are currently available.
More in preparation.

Tip/continuous operation of a motor
Reversing contactor circuit with direct switchover
Reversing contactor circuit via OFF
direction-of-rotation recognition
reversing drive
frequency measurement
impulse specification
etc.

Translated with www.DeepL.com/Translator

199.00 *

Not in stock

Product no.: 200106

Plug-on module "star-delta switching" (plug-on module)

The plug-on module simulates the function of an automatic star-delta motor through the main circuit and can easily be plugged onto the IKHDS training devices (24-pole plug). The module is compatible with the training devices LOGO!Learn /Advanced/Basic, PLC-Trainer 1500, PLC-Trainer 2000EDU and PLC-Trainer 1200.

Technical data
Operating voltage 24V DC
Dimensions (LxWxHx): 85 x 82 x 25 mm

Scope of delivery:
1 plug-on module "star-delta connection
1 exercise with solution for LOGO!8, S7-1200, S7-1500 and IOT2000 available.

80.00 *

In stock

Product no.: 200103

Plug-on module Slip ring rotor

This module is used to illustrate the function of the slipring motor as the main circuit. It can be plugged onto the LOGO! learn training devices, S7-1200/300/1500, IOT2000 and brought to function.

TECHNICAL DATA:
Operating voltage: 12V DC to 24V DC
Dimensions: (WxHxD) 85 x 82 x 25 mm

SCOPE OF SUPPLY:
1 Slip ring motor module

1 exercise with solution for LOGO!8, S7-1200, S7-1500 and IOT2000 available.

Translated with www.DeepL.com/Translator

80.00 *

In stock

Product no.: 610627

3-axis robot 

The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 8
Outputs 24V: 8
Advantages:
Ideal training, simulation and demonstration model for training, further education and industrial automation
Already finished, stable training model
Mounted on a stable wooden plate, the model is packed in a stable cardboard box.
ATTENTION: a PLC control 24V e.g. IKHDS training system S7-1200 (TIA portal) is absolutely necessary for operation.
Control program on request!

Translated with www.DeepL.com/Translator

729.00 *

In stock

Product no.: 300201
820.00 *

Not in stock

Product no.: 611225

conveyor

Conveyor belt with a length of 275 mm transports workpieces with a diameter of up to 29 mm. Several conveyor belts can be joined together to form a conveyor belt of any length. The model can be ideally combined with the training model "3-axis robot with gripper".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 3
Outputs 24V: 1

250.00 *

In stock

Product no.: 610325

Model "Punching machine with conveyor belt" for IKHS training systems

Ideal training, simulation and demonstration model for training, further education and industrial automation
Already finished, stable training model
Mounted on a stable wooden plate, the model is packed in a stable cardboard box.
24V industry standard 
ATTENTION: a PLC control 24V such as IKHDS training systems LOGO!Learn, PLC-Trainer 1200B, PLC-Trainer 1500B with task and proposed solution is absolutely necessary for operation.
Interface and programming examples with solutions for IKHDS trainers are optionally available.

310.00 *

Not in stock

Product no.: 900629
592.62 *

In stock