Product no.: 610627
3-axis robot The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
729.00 €
*
In stock |
|
Product no.: 701202
DetailsThe training device PLC-Rack 1200 is designed with a stylish and compact aluminum housing with sturdy aluminum profile rails. At the front there is a field for learning cards with a size of 110 x 82 mm. By simply replacing the laminated learning cards (attached with magnets) and the related teachware, 32 practical examples (32 learning cards) can be applied. It is also possible to lead input signals (24V DC) to the CPU via 4mm lab-jacks or via toggle switches (on - off - momentary on). With the built-in digital meter, by appropriately switching, it is possible to measure the analog input signals and one analog output signal in the range of+/- 10V DC. With two built-in power supplies (+/- 10V DC / 10mA) two voltages can be simulated via analog inputs (comparison of setpoint/actual values). At the lateral 37-pin D-sub socket different kinds of models can be connected (e.g. fischertechnik or ALU-LINE). Different interfaces are available on request. Additional information |
1,800.00 €
*
In stock |
|
Product no.: 610625
Cycle line with 2 processing machines Cycle line with a milling and drilling station with four conveyor belts in a U-shaped arrangement. The model can be ideally combined with the training model "3-axis robot with gripper". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
750.00 €
*
In stock |
|