Product no.: 610627
3-axis robot The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
729.00 €
*
In stock |
|
Product no.: 701202
DetailsThe training device PLC-Rack 1200 is designed with a stylish and compact aluminum housing with sturdy aluminum profile rails. At the front there is a field for learning cards with a size of 110 x 82 mm. By simply replacing the laminated learning cards (attached with magnets) and the related teachware, 32 practical examples (32 learning cards) can be applied. It is also possible to lead input signals (24V DC) to the CPU via 4mm lab-jacks or via toggle switches (on - off - momentary on). With the built-in digital meter, by appropriately switching, it is possible to measure the analog input signals and one analog output signal in the range of+/- 10V DC. With two built-in power supplies (+/- 10V DC / 10mA) two voltages can be simulated via analog inputs (comparison of setpoint/actual values). At the lateral 37-pin D-sub socket different kinds of models can be connected (e.g. fischertechnik or ALU-LINE). Different interfaces are available on request. Additional information |
1,800.00 €
*
In stock |
|
Product no.: 200111
DetailsThe Plug-On Module "LED Traffic Light 2" can be plugged easily on the the interface connector (24-pin) of the PLC-Trainer 1200. Five required switching states (car and pedestrian) can be realized. Two pushbuttons for request of signal (pedestrian light) are integrated on the module. |
95.00 €
*
In stock |
|
Product no.: 200104
Roulette / Motor Simulation This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8. TECHNICAL DATA: Operating voltage: 24V DC SCOPE OF SUPPLY: |
80.00 €
*
In stock |
|
Product no.: 200101
Details The Plug-On Module "Traffic Light" simulates a crosswalk with 4 traffic lights (car and pedestrian). 4 outputs of the LOGO! are used. It can be plugged easily on top of the training devices (24-pin connector). The module realizes with 4 digital outputs a traffic light for pedestrians and cars.
|
95.00 €
*
In stock |
|
New encoder motorPlug-on module Encoder motor The plug-on module encoder motor can be plugged directly into the interface connector (24-pin) of the PLC-Learn 1200, PLC-Trainer 1200, PLC-Trainer 300, LOGO!Learn Classic, and the IOT-Trainer2000. Technical data of the encoder motor: Quadrature encoder The following tasks with solutions are currently available. Tip/continuous operation of a motor Translated with www.DeepL.com/Translator |
199.00 €
*
Not in stock |
|
Product no.: 300209
Plug-on module Seven segment display With the Plug-On module Seven-Segment Display, digits from 0-9 and points can be displayed. Suitable for PLC-Learn 1200 4 digital inputs and 9 digital outputs (24V DC) are required. |
125.00 €
*
In stock |
|