… by practitioners for practitioners
Categories Hardware Siemens LOGO! 6/7/8 LOGO!Learn Advanced 8 - with LOGO! module 0BA8 Accessories
|
Product no.: 100119
Training device LOGO!Learn Advanced 8 Programme für LOGO!Soft Comfort
Furthermore, it is possible to use external simulators such as plug-on modules motor, traffic light, cube, etc. (see product data sheet) or models via a 24-pin interface connector. Scope of delivery: 1 Training device LOGO!Learn Advanced with LOGO!8 Translated with www.DeepL.com/Translator |
640.00 €
*
In stock |
|
|
|
Accessories
|
Product no.: 611225
conveyor Conveyor belt with a length of 275 mm transports workpieces with a diameter of up to 29 mm. Several conveyor belts can be joined together to form a conveyor belt of any length. The model can be ideally combined with the training model "3-axis robot with gripper". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: |
250.00 €
*
In stock |
|
|
|
Product no.: 200105
DetailsThe Plug-On Module "Dice" simulates a dice by 7 LEDs. With the switch S1 rolling the dice begins. The module can be plugged easily on top of the training devices LOGO!Learn Profi or Advanced and PLC-Trainer 1200. For operation with the LOGO! the Expansion Module "DM8" is required. |
80.00 €
*
In stock |
|
|
|
|
Product no.: 200106
Plug-on module "star-delta switching" (plug-on module) The plug-on module simulates the function of an automatic star-delta motor through the main circuit and can easily be plugged onto the IKHDS training devices (24-pole plug). The module is compatible with the training devices LOGO!Learn /Advanced/Basic, PLC-Trainer 1500, PLC-Trainer 2000EDU and PLC-Trainer 1200. Technical data Scope of delivery: |
80.00 €
*
In stock |
|
|
|
|
Product no.: 200104
Roulette / Motor Simulation This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8. TECHNICAL DATA: Operating voltage: 24V DC SCOPE OF SUPPLY: |
80.00 €
*
In stock |
|
|
|