PLC-Trainer 1200 - with CPU for TIA portal

Training system PLC-Trainer 1200 

The "PLC-Trainer 1200" training system is based on a stable aluminium angle. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output is indicated by 8 LEDs (status). The "Learning cards" field can be used to place and test learning cards. All 34 supplied tasks with solutions are structured according to the principle of "light to heavy". It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
1 potentiometer frequency generator for simulation of positioning tasks (frequency generator up to 5 kHz)
1 IR receiver
8 Push-button/lock switch for digital signal input
8 LED for status display 5mm red
1 slide switch for frequency generator
1 slide switch for horn
1 2-pole terminal for SIMATIC panel (Monocolor only)
1 3-pin terminal for signal board Analog output
1 interface connector 24-pin
1 interface connector 40-pin.
1 Service socket (0V)
CE testing

SCOPE OF SUPPLY:

1 PLC-Trainer 1200 with SIMATIC S7 1200 CPU 1214C DC/DC/DC, nominal 24V DC (the CPU 1215C with 24V DC can also be set up)
1 plug-in power supply AC230V /DC 24V 750mA
IR remote control
34 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German or English (please specify when ordering)