The training device PLC-Rack 1200 is designed with a stylish and compact aluminum housing with sturdy aluminum profile rails. At the front there is a field for learning cards with a size of 110 x 82 mm. By simply replacing the laminated learning cards (attached with magnets) and the related teachware, 32 practical examples (32 learning cards) can be applied. It is also possible to lead input signals (24V DC) to the CPU via 4mm lab-jacks or via toggle switches (on - off - momentary on). With the built-in digital meter, by appropriately switching, it is possible to measure the analog input signals and one analog output signal in the range of+/- 10V DC. With two built-in power supplies (+/- 10V DC / 10mA) two voltages can be simulated via analog inputs (comparison of setpoint/actual values). At the lateral 37-pin D-sub socket different kinds of models can be connected (e.g. fischertechnik or ALU-LINE). Different interfaces are available on request.

Technical Data:
•  Power supply connector and fuse 24V DC / 1.5 A
•  D-sub socket 37-pin wired (parallel connection) to 14 digital inputs and 10 digital outputs
•  14 Digital inputs are connected to toggle switches. 6 digital inputs are connected to 4mm lab jacks with status indication by LED (3 mm, green)
•  10 Digital outputs. 6 digital outputs are connected to 4mm lab jacks with status indication by LED (3 mm, red)
•  Voltage module with 8x 4mm lab jacks (4x 0V, 4x 24V DC)
•  Analog module with 2 adjustable voltage sources +/- 0…10V DC/10mA and digital meter (+/-10V DC)
•  Digital meter can be switched either to an analog input or an analog output

Scope of supply:
1 PLC-Rack 1200 including CPU 1214 DC/DC/DC
1 Power supply 230V AC/24V DC / 1,5A
32 Learning cards in transparent storage box
1 Teachware on CD including 32 exercises and solutions (English/German)
1 Technical documentation

Dimensions (LxWxH): 360 x 380 x150 mm
Weight: approx. 4.2 kg