Product no.: 900234
29.90 *

In stock


Product no.: 500104

The extension module DM8 with the module DM8 24 can be connected to the training device LOGO!Learn Advanced (only for DM8 with relay output).

Operating voltage 24V DC
14pin tub connector for connection of 4 digital inputs and 4 digital outputs.
4 outputs (relays) are directly connected to the interface connector via LOGO!Learn Advanced.
Weight approx. 0.15 kg
Dimensions (WxHxD) 35x145x100 mm


200.00 *

In stock

Product no.: 500113


The Expansion Module "2AA" provides 2 additional analog outputs for the LOGO!. The module can be coupled easily at the side of the training device LOGO!Learn Advanced. One output (R1) is wired directly to the interface connector of the training device LOGO!Learn Advanced.

Technical Data:
Operating voltage 24V DC
2 Terminals for connection of 2 analog outputs 0 to 10 V
Weight: approx. 0.5 kg
Dimensions (LxWxH): 35 x145 x100 mm

With LOGO! Expansion Module AM2 AQ
Incl. CD with exercise and solution

230.00 *

In stock

Product no.: 500115
184.45 *

Not in stock

Product no.: 600505
98.77 *

In stock

Product no.: 200104

Roulette / Motor Simulation

This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8.


Operating voltage: 24V DC
Dimensions (WxHxD): 85 x 89 x 15 mm

1 LED motor module

80.00 *

In stock

Product no.: 200101


The Plug-On Module "Traffic Light" simulates a crosswalk with 4 traffic lights (car and pedestrian). 4 outputs of the LOGO! are used. It can be plugged easily on top of the training devices (24-pin connector).
Teachware with 1 programming example is included. The module is compatible with LOGO!Learn Profi / Advanced / Basic and PLC-Trainer 1200.

Technical Data:
Operating voltage 12 to 24V DC
Weight: approx. 0.1 Kg
Dimensions (LxWxH): 85 x 82 x 10 mm

The module realizes with 4 digital outputs a traffic light for pedestrians and cars.

Scope of supply:
1 Plug-On Module Traffic Light (without model cars and pedestrians)
1 Teachware with practical sample

95.00 *

In stock

Product no.: 200116

Plug-on module 2-point controller

A heater (tubular lamp) is mounted on the Plug-On Module 2-point controller, which is covered with a transparent cover. The temperature is measured with a Pt1000 temperature sensor and an NTC resistor. The power supply and the heating are indicated by a green and red LED.

The following practical examples are included in the supplied teachware:

Introduction to control technology:                                                                                                

2-point controller, controller without hysteresis; controller with hysteresis; PTC resistor; NTC resistor; LDR resistor; temperature measurement with Pt100 /Pt1000 resistance sensor;

Practical applications

Propagator with Pt100
Temperature monitoring of a liquid in a boiler by means of an NTC resistor
Temperature monitoring of a storage hall for paper with web server

Operating voltage max. 24V DC
1 tubular lamp red 24V DC
1 NTC resistor
1 Pt1000
1 LED red
1 green LED 1 fuse
Dimensions (WxHxD): 85 x 89 x 40 mm
Weight: approx. 0.05 kg

Note: The Plug-On Module 2-point controller on the LOGO!Learn Advanced only functions in conjunction with the expansion module Pt100/Pt1000 - with LOGO! AM2 RTD.

90.00 *

In stock

Product no.: 200103

Plug-on module Slip ring rotor

This module is used to illustrate the function of the slipring motor as the main circuit. It can be plugged onto the LOGO! learn training devices, S7-1200/300/1500, IOT2000 and brought to function.

Operating voltage: 12V DC to 24V DC
Dimensions: (WxHxD) 85 x 82 x 25 mm

1 Slip ring motor module

1 exercise with solution for LOGO!8, S7-1200, S7-1500 and IOT2000 available.

Translated with

80.00 *

In stock

Product no.: 200106

Plug-on module "star-delta switching" (plug-on module)

The plug-on module simulates the function of an automatic star-delta motor through the main circuit and can easily be plugged onto the IKHDS training devices (24-pole plug). The module is compatible with the training devices LOGO!Learn /Advanced/Basic, PLC-Trainer 1500, PLC-Trainer 2000EDU and PLC-Trainer 1200.

Technical data
Operating voltage 24V DC
Dimensions (LxWxHx): 85 x 82 x 25 mm

Scope of delivery:
1 plug-on module "star-delta connection
1 exercise with solution for LOGO!8, S7-1200, S7-1500 and IOT2000 available.

80.00 *

In stock