PLC rack 1500
The PLC-Rack 1500 training device is equipped with an elegant and compact aluminium housing with stable aluminium profile rails. On the front there is a playing field for learning cards with a size of 110 x 82 mm. By simply replacing the laminated flashcards and the associated teachware, 32 practical examples (32 flashcards) can be used. It is also possible to route input signals (24V DC) to the CPU via 4mm lab sockets or via push/push switches. With the built-in digital measuring device, it is possible to measure the analog input signals and an analog output signal in the range of +/- 10 V DC by appropriate switching. With two built-in power supplies (+/- 10V DC / 10mA), two voltages can be simulated via analog inputs (comparison of setpoints / actual values). Various models can be connected to the 37-pin D-Sub socket on the side (e.g. fischertechnik or ALU-LINE). Various interfaces are available on request.
Technical data:
- Power supply connection and fuse 24V DC / 1.0 A
- D-Sub socket 37-pin wired (parallel connection) with 14 digital inputs and 10 digital outputs
- 14 digital inputs are connected to toggle switches. 6 digital inputs are connected to 4mm laboratory sockets with status indication via LED (3 mm, green).
- 10 digital outputs. 6 digital outputs are connected to 4mm laboratory sockets with status indication via LED (3mm, red).
- Voltage module with 8x 4mm laboratory sockets (4x 0V, 4x 24V DC)
- Analog module with 2 adjustable voltage sources 0 ... 10V DC / 10mA and digital measuring device (0...10V DC)
- Digital measuring instrument can be switched to either an analog input or an analog output
Scope of delivery:
1 SPS-Rack 1500 without CPU (CPU on request)
1 plug-in power supply 24V / 750mA
32 flashcards in transparent storage box
1 Teachware on CD with 32 exercises and solutions (English / German)
1 Technical documentation
Additional information
| Toggle switches (on-off-mom. on) for dig. signal input |
8 |
| Digital outputs with status LED |
8 |
| Possible digital inputs |
16 |
| Possible digital outputs |
12 |
| Supply voltage |
24 V DC |
| Input/output sockets 4 mm |
yes |
| Interface connector for simulation models |
no |
| D-sub socket |
37-pin (25-pin optional) |
| Variable power supplies |
2 pc. (0 -10 V DC/10 mA) |
| Learning cards |
32 pc., small (88 x 55 mm) |
| Attaching of Plug-On Modules |
no |
| IR receiver and remote control |
no |
| Frequency generator |
no |
