LOGO!Learn Tableau
The LOGO!Learn Tableau is used for external input/output of input/output signals from LOGO!Learn and for S7-1200 products from KAFTAN media.
All inputs from the interface connector (8DE) are routed to 4 mm sockets.
The status is indicated by a 3 mm green LED.
The built-in 4 mm sockets can be used to feed 12–24 VDC signals (e.g. from a push button, sensor, etc.) externally to the LOGO!Learn for processing.
All outputs (8DA) from the interface connector are connected to 4 mm sockets.
The status is indicated by a red 3 mm LED.
The built-in sockets can be used to feed 12...24 VDC signals externally to an actuator (e.g. contactor with coil voltage up to 24 V DC).
This makes it possible to switch motors, etc. with a contactor >24 VDC.
Ideally suited for commissioning and troubleshooting models, as well as for reading external signal transmitters, as the input signals are displayed via green LEDs.
Suitable for:
LOGO!learn Basic
LOGO!Learn Advanced
PLC Lern 1200
PLC Minirack 1200
Dimensions: (WxHxD) 150x90x60 mm)
Weight: approx. 0.3 kg
SCOPE OF DELIVERY:
1 LOGO!Learn Tableau
1 ribbon cable 1 metre 24-pin for connection to the LOGO!Learn, PLC Trainer 1200/1500/300, IOT2000
Adapters for 2 mm plugs must be ordered separately.
