Model "Punching machine with conveyor belt" for IKHS training systems

Ideal training, simulation and demonstration model for training, further education and industrial automation
Already finished, stable training model
Mounted on a stable wooden plate, the model is packed in a stable cardboard box.
24V industry standard 
ATTENTION: a PLC control 24V such as IKHDS training systems LOGO!Learn, PLC-Trainer 1200B, PLC-Trainer 1500B with task and proposed solution is absolutely necessary for operation.
Interface and programming examples with solutions for IKHDS trainers are optionally available.

LOGO!Learn Basic - with LOGO!8-Modul, power supply international

The training device „LOGO!Learn Basic" is built on a stable aluminium angle. For signal input are integrated 8 toggle switches (on - off - momentary on) as well as two potentiometers for analog value setting 0...10V. The signal output is indicated by four LEDs (5 mm). It is possible to plug external simulators like Plug-On Modules (e.g. Motor, Traffic Lights, etc. - available as accessories) or simulation models (fischertechnik, ALU-LINE) on the 24-pin interface connector. The signal output is indicated by four LEDs (5 mm). By slide switches on the board, the digital inputs (I7 and I8) can be switched to analog inputs (0...10V). The included 32 exercises are based on the principle "From easy to demanding" and are printed on 32 learning cards. You can easily replace them on the board as required.

TECHNICAL DATA:
Dimensions (LxWxH) 170 x120 x100 mm
Weight: 0.58 kg
CE certificate

SCOPE OF SUPPLY:
1 Training deviceLOGO!Learn Basic including controller LOGO! 12/24 RC (0BA6)
1 Power supply AC 230V / DC 12V 300 mA
32 Learning cards (practical examples with solutions) on CD-ROM

Construction and possible uses see Product data sheet

Training system PLC-Learn 1200 with CPU 1215C

The "PLC-Learn 1200" training system is based on a plastic housing. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output and the signal input are each indicated by 8 LEDs (status). The "flash cards" field can be used to place flash cards and test them with the supplied 32 tasks with suggested solutions.

The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult" and are very well suited for training as well as for exam preparation, e.g. for the training occupation "power electronics technician specialising in industrial engineering" (CPU 1215C).

It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

At the 26-pin interface, fischertechnik models such as the cycle line with 2 processing machines, conveyor belt etc. can be directly connected.

8 external inputs and 8 external outputs can be fed to the CPU via connecting cables at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). Furthermore, 2 analog inputs and 2 analog outputs of the CPU can be supplied via connecting cables to the CPU. Switching from current output 0..20mA to magnetic output 0...10V is possible via a slide switch.

An extension of the mounting rail for the construction of further modules, e.g. LOGO!8, is possible.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
8 Push-button/lock switch for digital signal input
8 LED for status display outputs 5mm red
8 LED for status display Inputs 5mm red
8 spring-loaded terminals for digital inputs 24VDC
8 spring-loaded terminals for digital output 24V
 7 Spring-loaded terminals for analog value processing
1 2mm LED Power indicator 3mm yellow
1 slide switch for current or voltage output
2 slide switches for analog internal/external as well as for plug-on module 2-point-controllers
5 Spring-loaded terminals 0V
3 spring terminals +12V DC
1 power supply socket for mains plug 24V DC /750mA max
1 interface connector 24-pin
1 interface plug 26-pin (fischertechnik)
2 PROFINET (LAN) sockets for patch cables in the rear panel
SCOPE OF SUPPLY:

1 PLC-Learn 1200 with SIMATIC 1215C DC/DC/DC, nominal 24V DC
1 plug-in power supply AC230V /DC 24V 750mA
32 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German
Order number: 701209-CPU

Dimensions: 310 x 170 x90mm (LxWxH)

Weight: 1,1 Kg

Training device LOGO!Learn Advanced 8

The training device LOGO!Learn Advanced is based on a stable aluminium angle. For signal input there are 8 push/latch switches and for analog value input 4 potentiometers for voltage adjustment 0-10V DC integrated. The signal output (status) is indicated by 4 LEDs.

Furthermore, it is possible to use external simulators such as plug-on modules motor, traffic light, cube, etc. (see product data sheet) or models via a 24-pin interface connector.

Scope of delivery:

1 Training device LOGO!Learn Advanced without LOGO!8
1 plug-in power supply AC 230V /DC 24V 750mA
34 flashcards in transparent box
DVD with 34 tasks and solutions in the languages: German, English, Spanish and Portuguese
1 IR remote control optionally available
Construction and application possibilities see product data sheet

Translated with www.DeepL.com/Translator

Cycle line with 2 processing machines

Cycle line with a milling and drilling station with four conveyor belts in a U-shaped arrangement. The model can be ideally combined with the training model "3-axis robot with gripper".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 9
Outputs 24V: 10

Translated with www.DeepL.com/Translator