Training system PLC-Learn 1500 without CPU 

The training system "PLC-learn 1500" is based on a stable aluminium angle. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output is indicated by 8 LEDs (status). The "Learning cards" field can be used to place and test learning cards. All 34 supplied tasks with solutions are structured according to the principle of "light to heavy". It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
8 Push-button/lock switch for digital signal input
8 LED for status display 5mm red
1 slide switch for horn
1 interface connector 24-pin
1 interface plug 26-pin (fischertechnik)
1 interface connector 40-pin

SCOPE OF SUPPLY:

1 PLC-Trainer 1500 without SIMATIC S7 1500 CPU ET200SP
1 plug-in power supply AC230V /DC 24V 750mA
34 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German
Basic book PLC course with SIMATIC S7-1500 

3-axis robot 

The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 8
Outputs 24V: 8
Advantages:
Ideal training, simulation and demonstration model for training, further education and industrial automation
Already finished, stable training model
Mounted on a stable wooden plate, the model is packed in a stable cardboard box.
ATTENTION: a PLC control 24V e.g. IKHDS training system S7-1200 (TIA portal) is absolutely necessary for operation.
Control program on request!

Translated with www.DeepL.com/Translator

Roulette / Motor Simulation

This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8.

TECHNICAL DATA:

Operating voltage: 24V DC
Dimensions (WxHxD): 85 x 89 x 15 mm

SCOPE OF SUPPLY:
1 LED motor module

Plug-on module Slip ring rotor

This module is used to illustrate the function of the slipring motor as the main circuit. It can be plugged onto the LOGO! learn training devices, S7-1200/300/1500, IOT2000 and brought to function.

TECHNICAL DATA:
Operating voltage: 12V DC to 24V DC
Dimensions: (WxHxD) 85 x 82 x 25 mm

SCOPE OF SUPPLY:
1 Slip ring motor module

1 exercise with solution for LOGO!8, S7-1200, S7-1500 and IOT2000 available.

Translated with www.DeepL.com/Translator

Details

details

Temperature sensor for connection to the LOGO!Learn extension module Pt100

TECHNICAL DATA:
Resistance: Pt100, temperature coefficient: 3850 ppm/K, temperature range:
-40° to +500°C, diameter: 6 mm (V4A), length of protection tube: 20 mm, length of connecting wire: 280 mm

SCOPE OF SUPPLY:
1 Temperature sensor Pt100