Training system PLC-Trainer 1200 

The "PLC-Trainer 1200" training system is based on a stable aluminium angle. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output is indicated by 8 LEDs (status). The "Learning cards" field can be used to place and test learning cards. All 34 supplied tasks with solutions are structured according to the principle of "light to heavy". It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
1 potentiometer frequency generator for simulation of positioning tasks (frequency generator up to 5 kHz)
1 IR receiver
8 Push-button/lock switch for digital signal input
8 LED for status display 5mm red
1 slide switch for frequency generator
1 slide switch for horn
1 2-pole terminal for SIMATIC panel (Monocolor only)
1 3-pin terminal for signal board Analog output
1 interface connector 24-pin
1 interface connector 40-pin.
1 Service socket (0V)
CE testing

SCOPE OF SUPPLY:

1 PLC-Trainer 1200 without SIMATIC S7 1200 CPU 1214C DC/DC/DC, nominal 24V DC (the CPU 1215C with 24V DC can also be built up)
1 plug-in power supply AC230V /DC 24V 750mA
IR remote control
34 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German or English (please specify when ordering)
Construction and application possibilities see product data sheet

3-axis robot 

The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 8
Outputs 24V: 8
Advantages:
Ideal training, simulation and demonstration model for training, further education and industrial automation
Already finished, stable training model
Mounted on a stable wooden plate, the model is packed in a stable cardboard box.
ATTENTION: a PLC control 24V e.g. IKHDS training system S7-1200 (TIA portal) is absolutely necessary for operation.
Control program on request!

Translated with www.DeepL.com/Translator

details

Temperature sensor for connection to the LOGO!Learn extension module Pt100

TECHNICAL DATA:
Resistance: Pt100, temperature coefficient: 3850 ppm/K, temperature range:
-40° to +500°C, diameter: 6 mm (V4A), length of protection tube: 20 mm, length of connecting wire: 280 mm

SCOPE OF SUPPLY:
1 Temperature sensor Pt100