Product no.: 1001110
LOGO!Learn classic with LOGO!8 and DM8 12/24R The "LOGO!Learn professional" training system is mounted on a plastic housing. For signal input there are 8 push/latch switches and for analogue value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V integrated. The signal output is indicated by 4 LEDs (status). Learning cards can be placed on the "Learning cards" field and tested with the supplied 32 tasks with suggested solutions. The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult". It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc., as well as models onto a 24-pin interface connector. fischertechnik models such as conveyor belts, 3D robots etc. can be connected directly to the 26-pin interface. Two external inputs can be connected to the LOGO!8 outputs at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). It is possible to extend the mounting rail for the assembly of further modules, e.g. LOGO!8. TECHNICAL DATA: Operating voltage: 24V DC / 750mA 12 digital inputs, of which 4 digital inputs can be used as analog inputs 8 digital outputs SCOPE OF SUPPLY: 1 LOGO!Learn professional with LOGO!8 current status Dimensions: 215 x 130 x130mm (LxWxH) Weight: 0,78 Kg
|
425.00 €
*
Not in stock |
Product no.: 200111
DetailsThe Plug-On Module "LED Traffic Light 2" can be plugged easily on the the interface connector (24-pin) of the PLC-Trainer 1200. Five required switching states (car and pedestrian) can be realized. Two pushbuttons for request of signal (pedestrian light) are integrated on the module. |
95.00 €
*
In stock |
|
Product no.: 200105
DetailsThe Plug-On Module "Dice" simulates a dice by 7 LEDs. With the switch S1 rolling the dice begins. The module can be plugged easily on top of the training devices LOGO!Learn Profi or Advanced and PLC-Trainer 1200. For operation with the LOGO! the Expansion Module "DM8" is required. |
80.00 €
*
In stock |
|
Product no.: 200106
Plug-on module "star-delta switching" (plug-on module) The plug-on module simulates the function of an automatic star-delta motor through the main circuit and can easily be plugged onto the IKHDS training devices (24-pole plug). The module is compatible with the training devices LOGO!Learn /Advanced/Basic, PLC-Trainer 1500, PLC-Trainer 2000EDU and PLC-Trainer 1200. Technical data Scope of delivery: |
80.00 €
*
In stock |
|
Product no.: 200104
Roulette / Motor Simulation This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8. TECHNICAL DATA: Operating voltage: 24V DC SCOPE OF SUPPLY: |
80.00 €
*
In stock |
|
Product no.: 300209
Plug-on module Seven segment display With the Plug-On module Seven-Segment Display, digits from 0-9 and points can be displayed. Suitable for PLC-Learn 1200 4 digital inputs and 9 digital outputs (24V DC) are required. |
125.00 €
*
In stock |
|
Product no.: 610325
Model "Punching machine with conveyor belt" for IKHS training systems Ideal training, simulation and demonstration model for training, further education and industrial automation |
310.00 €
*
Not in stock |
|
Product no.: 611225
conveyor Conveyor belt with a length of 275 mm transports workpieces with a diameter of up to 29 mm. Several conveyor belts can be joined together to form a conveyor belt of any length. The model can be ideally combined with the training model "3-axis robot with gripper". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: |
250.00 €
*
In stock |
|
Product no.: 610627
3-axis robot The 3-axis robot with gripper positions workpieces quickly and precisely in three-dimensional space. Degrees of freedom: axis 1: turn 180°, axis 2: forward/backward 90 mm, axis 3: lift/lower 150 mm. The model can be ideally combined with the training models "conveyor belt", "punching machine" and "cycle line". Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals. Technical details: Translated with www.DeepL.com/Translator |
729.00 €
*
In stock |
|