Plug-on module Encoder motor

The plug-on module encoder motor can be plugged directly into the interface connector (24-pin) of the PLC-Learn 1200, PLC-Trainer 1200, PLC-Trainer 300, LOGO!Learn Classic, and the IOT-Trainer2000.

Technical data of the encoder motor:

Quadrature encoder
Power supply 24VDC
Signal: quadrature encoder, push-pull output (0/24V) max. 10mA
Frequency: max 1KHz
Motor 24V DC

The following tasks with solutions are currently available.
More in preparation.

Tip/continuous operation of a motor
Reversing contactor circuit with direct switchover
Reversing contactor circuit via OFF
direction-of-rotation recognition
reversing drive
frequency measurement
impulse specification
etc.

Translated with www.DeepL.com/Translator

conveyor

Conveyor belt with a length of 275 mm transports workpieces with a diameter of up to 29 mm. Several conveyor belts can be joined together to form a conveyor belt of any length. The model can be ideally combined with the training model "3-axis robot with gripper".

Connection to the PLC control: The model has a printed circuit board with relays for reversing the direction of rotation of the motors. All inputs and outputs are connected to tub plugs (26-pin, pitch 2.54mm) as well as to terminal blocks with push-in terminals.

Technical details:
Digital inputs: 3
Outputs 24V: 1