Product no.: 100015
Installation Manual Kit LOGO!Learn Basic D/E |
In stock |
Product no.: 100119
Training device LOGO!Learn Advanced 8 Programme für LOGO!Soft Comfort
Furthermore, it is possible to use external simulators such as plug-on modules motor, traffic light, cube, etc. (see product data sheet) or models via a 24-pin interface connector. Scope of delivery: 1 Training device LOGO!Learn Advanced with LOGO!8 Translated with www.DeepL.com/Translator |
640.00 €
*
In stock |
|
Product no.: 100101
LOGO!Learn Basic - with LOGO!8-Modul, power supply international The training device „LOGO!Learn Basic" is built on a stable aluminium angle. For signal input are integrated 8 toggle switches (on - off - momentary on) as well as two potentiometers for analog value setting 0...10V. The signal output is indicated by four LEDs (5 mm). It is possible to plug external simulators like Plug-On Modules (e.g. Motor, Traffic Lights, etc. - available as accessories) or simulation models (fischertechnik, ALU-LINE) on the 24-pin interface connector. The signal output is indicated by four LEDs (5 mm). By slide switches on the board, the digital inputs (I7 and I8) can be switched to analog inputs (0...10V). The included 32 exercises are based on the principle "From easy to demanding" and are printed on 32 learning cards. You can easily replace them on the board as required. SCOPE OF SUPPLY: Construction and possible uses see Product data sheet |
In stock |
|
Product no.: 100100
LOGO!Learn Basic - without LOGO!-Modul The training device „LOGO!Learn Basic" is built on a stable aluminium angle. For signal input are integrated 8 toggle switches (on - off - momentary on) as well as two potentiometers for analog value setting 0...10V. The signal output is indicated by four LEDs (5 mm). It is possible to plug external simulators like Plug-On Modules (e.g. Motor, Traffic Lights, etc. - available as accessories) or simulation models (fischertechnik, ALU-LINE) on the 24-pin interface connector. The signal output is indicated by four LEDs (5 mm). By slide switches on the board, the digital inputs (I7 and I8) can be switched to analog inputs (0...10V). The included 32 exercises are based on the principle "From easy to demanding" and are printed on 32 learning cards. You can easily replace them on the board as required. SCOPE OF SUPPLY: Construction and possible uses see Product date sheet |
In stock |
|
Product no.: 200111
DetailsThe Plug-On Module "LED Traffic Light 2" can be plugged easily on the the interface connector (24-pin) of the PLC-Trainer 1200. Five required switching states (car and pedestrian) can be realized. Two pushbuttons for request of signal (pedestrian light) are integrated on the module. |
95.00 €
*
In stock |
|
Product no.: 200101
Details The Plug-On Module "Traffic Light" simulates a crosswalk with 4 traffic lights (car and pedestrian). 4 outputs of the LOGO! are used. It can be plugged easily on top of the training devices (24-pin connector). The module realizes with 4 digital outputs a traffic light for pedestrians and cars.
|
95.00 €
*
In stock |
|
Product no.: 200104
Roulette / Motor Simulation This module is used to simulate a motor with 6 LEDs in clockwise or counterclockwise rotation and with low, medium or high speed using a shift register. It can be attached to the LOGO!Learn-Advanced as well as to the PLC-Trainer 1200 and IOT2000EDU and brought to function. The Plug-On module is also suitable as a Rouellette. Operation on the LOGO! is only possible with the additional extension module DM8. TECHNICAL DATA: Operating voltage: 24V DC SCOPE OF SUPPLY: |
80.00 €
*
In stock |
|