PLC Learn 1200 without CPU

Training system PLC-Learn 1200 without CPU 1215C

The "PLC-Learn 1200" training system is based on a plastic housing. For signal input there are 8 push/latch switches and for analog value output 2 potentiometers for voltage adjustment (e.g. actual/setpoint value) 0-10V/DC 10mA integrated. The signal output and the signal input are each indicated by 8 LEDs (status). The "flash cards" field can be used to place flash cards and test them with the supplied 32 tasks with suggested solutions.

The 32 supplied tasks with solutions are structured according to the principle from "easy to difficult" and are very well suited for training as well as for exam preparation, e.g. for the training occupation "power electronics technician specialising in industrial engineering" (CPU 1215C).

It is also possible to plug plug-in modules such as motors, traffic lights, cubes, etc. as well as models onto a 24-pin interface connector.

At the 26-pin interface, fischertechnik models such as the cycle line with 2 processing machines, conveyor belt etc. can be directly connected.

8 external inputs and 8 external outputs can be fed to the CPU via connecting cables at the spring-loaded terminals attached to the board (10A, up to a nominal cross-section of 1.5qmm). Furthermore, 2 analog inputs and 2 analog outputs of the CPU can be supplied via connecting cables to the CPU. Switching from current output 0..20mA to magnetic output 0...10V is possible via a slide switch.

An extension of the mounting rail for the construction of further modules, e.g. LOGO!8, is possible.

TECHNICAL DATA:

Operating voltage: 24V DC / 750mA
2 potentiometers for analog value input 0...10V DC / 10mA
8 Push-button/lock switch for digital signal input
8 LED for status display outputs 5mm red
8 LED for status display Inputs 5mm red
8 spring-loaded terminals for digital inputs 24VDC
8 spring-loaded terminals for digital output 24V
 7 Spring-loaded terminals for analog value processing
1 2mm LED Power indicator 3mm yellow
1 slide switch for current or voltage output
2 slide switches for analog internal/external as well as for plug-on module 2-point-controllers
5 Spring-loaded terminals 0V
3 spring terminals +12V DC
1 power supply socket for mains plug 24V DC /750mA max
1 interface connector 24-pin
1 interface plug 26-pin (fischertechnik)
2 PROFINET (LAN) sockets for patch cables in the rear panel
SCOPE OF SUPPLY:

1 PLC-Learn 1200 without SIMATIC 1215C DC/DC/DC, nominal 24V DC
1 plug-in power supply AC230V /DC 24V 750mA
32 flashcards 110x81 mm laminated in transparent box
DVD with 32 tasks with solutions in German
Order number: 701209-CPU

Dimensions: 310 x 170 x90mm (LxWxH)

Weight: 1 Kg